GSS Machinery can make your punching machines fit your needs. Additionally, we offer additional accessories that allow you to punch in vertical and horizontal positions as well as punching with your hands. This will increase your punching power.

The portable single-acting hydraulic punches we offer are widely used in the construction industry, electricity industry, and many other outdoor fields. It has a maximum thickness of 16mm, a maximum diameter of 24mm and a maximum throat depth in excess of 110mm.

Our Porta-Punch is the quickest and easiest way to punch up to 13/16" Round Holes in 3/8" thick mild steel with a MAXIMUM tensile strength of 65,000 psi.

We have spent millions on our own factories and test labs so that our tools will compete with the best professional brands. Because we bypass the middleman, we can pass the savings onto you at a fraction of the cost. It's as simple as that!

Homemade

GSS Machinery Portable Hydraulic Punches provide a quick and efficient way to produce holes and slots in beams, angle, channels, plates, and bar stock. This steel hole punch has a Double Action design which reduces cycle times. It is also portable and easy to use, which results in high-efficiency hole production.

Capable of continuously processing an indefinite number of holes and these processed holes are safe from burrs, which makes them unique and beautiful.

Homemade
Hydraulic Punch Dies

Hydraulic Punch Dies

The portable hydraulic punching machine for 35 tons weighs only 31 pounds and can be used in just seconds. Dual-action stripper holds material while you punch. Then it removes the material from your punch. This tool is perfect for punching truck frames, tower iron, I-beams, and bus bars with a maximum strength of 65,000 PSI. It can be mounted on your work bench or taken to the job site. Within 24 hours, you can have your rectangular, square, hex, and oval tools.

The mold can be adjusted to accommodate a wide range of holes and different shapes.

Hydraulic Chassis Punch

GSS Machinery offers hydraulic punches that are superior for punching and forming sheet metal. GSS Machinery is the largest distributor of hydraulic punches. These punches are powered by the most powerful engines to produce precise, smooth punches in a very short time. They are also more efficient than regular drilling.

Here are some maintenance tips: Make sure to clean the punch and die. They don't need lubrication but cleaning can prolong their life expectancy. Use only Enerpac Oil for both the punch and pump. Always match punch and die correctly. You should set up larger openings so that the dies point down for operations. Make sure to immediately replace cracked, chipped or worn-out dies and punches. To avoid cracks in materials processing, always use the appropriate lifting force.

Hydraulic Punch Hole Tools
Hydraulic Punch Hole Tools

The machine's range can punch special-shaped holes quickly, including round and oblong. This machine has an automatic backup switch, which can be used to stop the punch from being stopped at any given time. This single-acting hydraulic features a compact design that is powered by a hydraulic hydraulic pump, but also has manual and electrical hydraulic pump options. You can choose any one depending on your industry needs.

Hydraulic punches are designed to puncture metals using round, square, or oblong holes. They are designed to work on mild steel, nonferrous metals and non-shattering polymers.

Automatic

The best single-acting, portable hydraulic punch is one that you can trust. We offer a wide range of punches that are compatible with your application. Contact us immediately for any questions or suggestions. We will be happy to help you with your technical problems.

Some maintenance tips: Always clean the punch and die. Although they do not need lubrication, cleaning can extend their durability. Make use of only Enerpac Oil in both punch and pumps. Match punch and die appropriately at all times. For operations, ensure you set up dies with bigger openings to point downwards. Ensure you change cracked, chipped, or worn-out punches and dies immediately. Always observe the suited lifting force to avoid cracks while processing materials.

Frequently Asked Questions

A knockout punch, also known as a chassis punch, panel punch, Greenlee punch, or Q-max in metalworking, is a hand tool used to punch a hole through sheet metal. It is a simple tool made up of a punch, die, and screw.

A punch press has two cooperating components: the punch, which is attached to the machine's reciprocating ram, and the die, which is clamped onto a bed or anvil with a flat surface perpendicular to the ram's path. When in use, the punch pushes against the workpiece held in the die.

The combination of ease of hydraulic operation and precision-ground knockouts results in clean, quick holes. Pumps are available with either foot or hand pumps. 3-point punch/die sets that are precision-ground.