Fiber Laser Cutting Machine How It Works

Fiber Laser Cutting Machine Working Principle

The laser used is a pulsed fiber laser with a wavelength of 1064 nm. It has an estimated lifetime of 25,000+ hours.

FSL Mouse Pandora from Full Spectrum Laser has 20W-30W and 50W options.

They also offer a 30-day returns policy and a 2-year parts guarantee for all components, including the fiber laser in FM–Desktop.

Buy safety glasses to protect this machine from the 1064 nm laser beam.

Fiber Laser Machinery 635nm

Epilog offers two fiber laser lines: the Fusion Edge series, and the Fusion Pro series. Both series are available in 30-watt and 50-watt configurations.

FSL Muse Pandora's 20W version can deep engrave sterling at a speed up to 708 ipm using 100% of its laser power.

Fiber Laser Machinery 635nm
Fiber Lasers Machinery Ltd

Fiber Lasers Machinery Ltd

The software interface can be accessed by typing in your machine's IP address on the browser's address bar.

With the addition of a galvo head, they can also work at a very high speed. Galvo heads are typically used in portable laser engravers.

Lasers

A 30W fiber laser can be used to engrave stainless-steel at a 90 degree angle and with a speedy speed of 3,543 IPM. It uses 100% of the laser's power.

Just know that the running cost of plasma is lower than laser. In general, it cost about 15/hr to run plasma cutting machines. It takes about 20/hr to run a laser machine.

How thick can a 150W laser cut
How thick can a 150W laser cut

They also provide a 30-day return policy and 2-year parts warranty for all the components and the fiber laser in FM-Desktop.

You don't need to worry about leftover cutting residue such as dross if you can set the parameters correctly in laser cutting.

Which laser is best for cutting

Fiber lasers are much more efficient than CO2 lasers and use less energy. They also operate at a shorter wavelength, between 780 and 2200nm, which gives them a higher absorption rate.

Fiber lasers can be used to engrave many applications. The wavelength range of fiber lasers is 780nm – 2200nm.

Frequently Asked Questions

Fiber lasers typically cost between $20,000 and $45,000.

Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.

To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.