How To Become A Technical Diver

How long can you stay underwater without a rebreather

You can do eLearning and coursework at home to help support local dive shops. Then, travel to complete your training dives. For a referral, contact your local PADI Dive Center.

New gear means new techniques. Sidemount diving, even if it's simple, requires some new skills (easily learned).

You can choose from the following options to learn more about diving or for lessons alternatives.

Some other wreck diving books are ‘The Last Dive’ by Bernie Chowdhury about father and son who are crazy about wrecks and eventually find their destiny on a German U-boat.

How do I get cave certified

Apart from the Sidemount equipment you will need your normal wetsuit, fins mask, computer, compass, DSMB, and other accessories.

While we are able to teach the SDI course if you ask, the default is the TDI. Although you can do this program as an individual course, we recommend that students combine it with our Apprentice Cave Diver course.

How To Become A Technical Diver
How do I get cave certified
What should you never do while scuba diving

What should you never do while scuba diving

Although I'm still learning, Sidemount diving is something I feel confident in. I have done 20 Sidemount dives and I can proudly say I'm a Sidemount diver.

Backmounted doubles came into use in part because of the problems with backmounted independents and single orifice doubles, neither of which are as common in modern diving. Independents are two cylinders strapped to one’s back with independent regulators on each one. If a 1st stage was to fail the diver was down to one cylinder. Single orifice doubles were two cylinders linked together with a valve, and one 1st stage regulator. If a first stage failed on a single orifice doubles set all the gas would be lost. The isolated manifold doubles used today eliminate both of those problems. Each cylinder can be worked independently, but the diver can also breathe gas from both cylinders out of one regulator. This form of doubles is typically held together with metal bands and the valves are linked with an isolation manifold, allowing the two to be separate if needed. Backmounted doubles diving is similar to regular single cylinder backmount, offering a profile that is vertically the same.

Scuba Diving

The next day was technical sidemount. This means that we added our deco 50 and 100 percent oxygen tanks on either side. This can increase your profile underwater. It is important that you keep your tanks as small as possible. The clips can be found on each side. As your tanks become buoyant, you will adjust your tank position to fit the second clip. Here, the goal is to be as efficient as possible. Each few minutes, you switch your breathing between the tanks. By doing this, the pressure in each of the tanks will decrease at roughly the exact same rate. In the event that a tank or regulator fails you will still be able to breathe. It is important to gain experience with any new thing. I spent the next few nights doing deco dives with the sidemount rig. I was buddied with Evolution coowner David Joyce who is a very experienced Tec diver as well as a Trimix instructor. One dive saw us visit the Japanese Mogami Japanese Mogami sank at 164 feet. It was here that I was seduced by old gas masks and uniforms as well as a few bones.

If you want some diving classes alternative and lessons or want to know what's best next for your education, take a look at the three options below.

How To Become A Sidemount Technical Scuba Diver Rider
How To Become A Sidemount Technical Scuba Diver Rider

Being a technical diver requires a lot of training, experience, and passion. The added risks of technical diving are not worth the risk if any one of these is missing.

In general Sidemount is more task loading for a diver as the pressure in each tank needs to be balanced in order to have enough gas for an out of air diver and to be balanced on each side.

Side Mount Scuba Configuration

Sidemount diving is also very popular, even in open water. Why? Because diving sidemount is very comfortable and easy to learn.

There are several more agencies that provide technical diver training which are more region specific. In general the recommendation is to find a reputable instructor, look for recommendations from trusted sources and choose your instructor accordingly. Trust and comfort during the course are invaluable and will help you to feel confident and comfortable to push your boundaries and gain the knowledge you need to go beyond your current certification level.

Check our other pages :

Frequently Asked Questions

Technical diving (also known as tec diving or tech diving) is non-professional scuba diving that exceeds the agency-specified limits of recreational diving.

from 170 to 350 feet
While conventional scuba diving has a recommended maximum depth of 130 feet, technical divers may work at depths ranging from 170 feet to 350 feet, and sometimes even deeper.

To begin a technical diving course, you must have completed the following prerequisites: a PADI Advanced Open Water Diver certificate or equivalent, a PADI Enriched Air Diver certificate or equivalent, and a PADI Deep Diver certificate or proof of at least 10 dives to 30 metres/100 feet.