Head
The laser arm is held on the Z-axis by the support column. Adjusting the Z-axis height adjust knob can change the laser focus.
It has a motorized entrance. It is compatible with FSL Muse Pandora on a desktop.
Emission
F-theta is the used for laser modules. High energy uniformity lens, narrow focus spot and low attenuation.
Plasma can cut any metal that has conductive properties. Laser machines have difficulty with reflective metals like copper, aluminum, and brass.
Amazon does not have an official return policy. However, you can get a replacement within 30 days if you order through Amazon.
Fiber lasers are centered around the laser source. There is no gaseous medium inside them like CO2 lasers.
The laser arm is held on the Z-axis by the support column. Adjusting the Z-axis height adjust knob can change the laser focus.
It has a motorized entrance. It is compatible with FSL Muse Pandora on a desktop.
The laser used in this experiment is a pulsed-fiber laser with a wavelength at 1064nm. It has an estimated life span of more than 25,000 hours.
FSL Muse Pandora may be upgraded to include a rotary Axis, Z-travel expansion, fume extractors and special focus lenses.
When the water temperature is lower than the ambient temperature and the ambient humidity is high, condensation water will be generated on the surface of the circulating water pipe and the device to be cooled. When the above situation occurs, it is recommended to increase the water temperature or insulate the water pipe and the cooled device.
The laser beam generated by the amplifier is then fed to cutting heads using a flexible optic fiber.
Fiber lasers do not require as much energy as CO2 lasers. Instead, they operate at a shorter wavelength (780 nm to 2220 nm), giving them a much higher absorption.
MOPA fiber-laser, a special type that uses fiber lasers for color laser engravings of metals, has a greater pulse width and frequency control.
The 30W fiber-laser can engrave dog tags onto stainless steel at a 90deg angle and at a speed of 708 IPM by using 70% of the power.
FSL Muse Pandora can be upgraded with a rotary, expanded Z-travel and fume extractors.
Applications for the 50 Watt Fiber Laser Deep Engraving Machine:
Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.