How thick can a 150W laser cut

Fiber Laser Marking Machine Parameters

Muse Pandora can be mounted on an adjustable work table, as shown in the below illustration, to allow for precise engraving of such lenses.

The support column (Z-axis) holds the laser arm, and the laser focus can be adjusted by moving the Z-axis using the height adjustment knob.

There are several laser power options available: 1000W to 1500W, 2000W to 2500W, 2500W to 3000W. These fiber laser machines are fast and precise, with a cutting speed of 35 meters per minute. Laguna Tools also offers machines that have an enclosed area for reducing light pollution.

Epilog offers two fiber laser lines: the Fusion Edge series, and the Fusion Pro series. Both series are available in 30-watt and 50-watt configurations.

Fiber Laser Marking Machine Parameters
Technology

Technology

Fiber lasers have revolutionized the laser metal cutting industry thanks to their low maintenance costs and high cutting efficiency.

Carbon steel, stainless steel, silicon steel, alloy steel, spring steel, mild steel, aluminum, galvanized steel, tool steel, aluminized zinc plate, copper, brass, pickling sheet, titanium, silver, gold, iron, alloy, and other metal sheets and tubes.

Co2 Laser

The one thing you should know is that fiber lasers have a limited work-bed size and can only cut certain materials.

It simply means that, when working in materials such as metals that reflect laser light, they absorb fiber light at a much greater rate than the laser light generated from CO2 lasers.

Co2 Laser

Cutting

You can mount Muse Pandora under an adjustable work desk, as shown below, for effective engraving when using such lenses.

High-concentrated power lenses with a longer focal length are used to expand the engraving area.

Fiber Laser Welding Machine Stainless Steel

It can engrave at a maximum speed of 11,760 ipm and is designed for engraving on metals. It can mark detailed fonts and images on smooth or uneven metal parts.

This means that fiber laser light will be absorbed at a higher rate by metals than CO2 lasers when they are working with them.

Co2 Laser

Check our other pages :

Production

Fiber laser machines, on the other hand, provide a zero contact procedure in which the laser beam does not physically interact with the material it is aimed at. This procedure ensures that only the heated area is directly affected, with no risk in the material's vicinity. It is also a distinct procedure, and fiber laser machines produce high-quality, accurate, and precise cuts that are visible to machines and operators.

A fiber laser cutter needs regular inspection and maintenance. If there is deformation or other forms, you should know that the laser cutting head has been damaged a little at this time, and you need to replace it. Failure to replace will affect the cutting quality and increase the cost, and some products may need to be reprocessed to reduce production efficiency.

Frequently Asked Questions

Thin carbon fiber mat can be cut with some fraying - but not when coated. The laser can cut or etch. The laser can cut materials such as wood, paper, cork, and some plastics.

To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.
 

Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.