Single Acting Hydraulic Punches Quick Connect

Single Acting Hydraulic Punches Quick Change

This machine uses a dual-action model to reduce cycle times. Additionally, its compact design permits minimal material handling. This results in high-quality holes, compared to other processes.

Hydraulic punches that are single-acting and portable can punch holes with precision and speed. It comes with automatic punches, returns, as well as reset operations. This makes it great for different materials such angle steel or channel steel, H shapes, and flat sheet (copper plate and aluminum, iron and steel plates).

GSS Mchinery's portable, double-acting hydraulic punches are ideal for fast production of holes and slots in various materials like beam flanges and angle channels, plates and bar stock.

The 35-Ton hydraulic punching machine weighs 31 pounds and punches quickly. The dual-action remover holds the material and strips it so that you can punch the next hole in just seconds. It is suitable for punching railings, I-beams, tower iron, truck frames and truck frames. The maximum tensile strength is 65,000 Psi. Mount it to your work bench, or bring it to your job site. In less than 24 hours, rectangular, square or hex tools can be ordered.

Single Acting Hydraulic Punches General Electric

This hydraulic punch range has been used in many industries, including utility pole cross arms, electric tower cross arms and elevator brackets.

Single Acting Hydraulic Punches General Electric
Single Acting Hydraulic Punches Wall Episode

Single Acting Hydraulic Punches Wall Episode

Hydraulic Benchpresses can be used to speed up the fabrication process without causing arm fatigue. It has a 3/8 inch thick plate construction that can be used in many different ways. These dies can be used with an HFrame press, hydraulic punch driver, and even with a 3/4'' or 7/16'' draw bolt for dimpling PortaFab machines, Scotchman’s entrylevel ironworker. This unit, which packs 45 tons in hydraulic power in a small 110 volt box, is extremely useful for aligning punches. This punch is ideal for punching spring steel to mount race for punching angle Iron. A hole can easily be punched from 9/16 inches away from the web. You can use the optional Porta Power or the rotary style punch to punch the hydraulic accessory holes on Edwards ironworkers. The punching times are approximately 4.5 seconds. It boasts a fast punching speed of 4.5 seconds, a jogdown punch for easy alignment and a power - retractable punch. Choose between 115 volt and a US...

GSS Machinery can make your punching machines fit your needs. Additionally, we offer additional accessories that allow you to punch in vertical and horizontal positions as well as punching with your hands. This will increase your punching power.

Punch Die

This machine features a dual-action model that reduces cycle times, and its compact design allows minimized material handling, which produces highly effective holes compared with other processes.

GSS Machinery portable hydraulic punches are perfect for producing holes and slots in beams, angles, channel, plates, and bar stock. This steel hole punch is designed with a Double Action design. The reduced cycle times, combined with the high portability of the machine, allow for faster material handling, resulting in highly efficient hole production.

Cylinder
Cylinder

The puncher has a well-designed design, strong upper and low molds, and can accurately punch holes without shifting. This puncher is suitable for various metal plates, including channel steel, "L"-shaped steel and H-shaped. It is widely used across different industries, including construction and electricity.

The single-acting, portable hydraulic punches can be used extensively in construction, the electricity industry, and other outdoor fields. The maximum punching thickness is approximately 16mm. It can also punch 24mm diameter and 110mm throat depth.

Single Acting Hydraulic Power Unit

Our Porta Punch Package includes the 35 Ton C-Frame and an Electric/Hydraulic Pressure Pump. It also comes with a 10' or 20ft Hose and four sets if stock Punches and Die. You can choose from sizes 1/4", 5/16", 6/8", 7/16", 1/2"", 17/32", 9,/16", 5/8", 11/16", 1/2", 3/4", 25/32", 13,16" and 13/16".

A hydraulic pump powers the compact design. It makes drilling holes easy. It has a maximum output of 49 tonnes, a maximum pressure setting of 10,000 psi and a weight of 63 lbs. You will find optional accessories like a hose cable assembly, spanner and sub handle assemblies, toolbox, 22mm push-and-die, 4mm Allen wrench and lockout assembly.

Frequently Asked Questions

Hydraulic punches are used to create round, square, or oblong holes in metal. They are intended for use with mild steel, nonferrous metals, and some plastics (non-shattering). Hydraulic punches can be powered by hand pumps, air/hydraulic, gas, or electric pumps capable of producing up to 10,000 psi (700 bar).

A punch is a tool used to make an indent or a hole in a hard surface. They are typically made of a hard metal rod with a narrow tip on one end and a broad flat "butt" on the other.

A punch press has two cooperating components: the punch, which is attached to the machine's reciprocating ram, and the die, which is clamped onto a bed or anvil with a flat surface perpendicular to the ram's path. When in use, the punch pushes against the workpiece held in the die.