GSS Machinery Portable Hydraulic Punches provide a quick and efficient way to produce holes and slots in beams, angle, channels, plates, and bar stock. This steel hole punch has a Double Action design which reduces cycle times. It is also portable and easy to use, which results in high-efficiency hole production.
This 14 piece hydraulic punch kit makes it quick and easy to punch holes in 11 gauge mild steel, 16 gauge stainless steel. The compact design makes it easy to take the hydraulic punch with you to any job site. Faster, easier and more precise than manual punches.
The machine's range can punch special-shaped holes quickly, including round and oblong. This machine has an automatic backup switch, which can be used to stop the punch from being stopped at any given time. This single-acting hydraulic features a compact design that is powered by a hydraulic hydraulic pump, but also has manual and electrical hydraulic pump options. You can choose any one depending on your industry needs.
We have invested millions of dollars in our own test labs and factories, so our tools will go toe-to-toe with the top professional brands. And we can sell them for a fraction of the price because we cut out the middleman and pass the savings on to you. It's just that simple!
Well-designed puncher, sturdy upper and lower molds, and can precisely punch holes without shifting. Ideal for “L” shaped steel, channel steel, H-shaped steel, and different metal plates. It is widely used in different electricity and construction industries.
Gulf States Saw & Machine Co. makes portable hydraulic punches. These punches can be used to punch and revert, and are fully automated thanks to its built-in dexterous control mechanism.
It is faster than regular drills and can be done quickly and with high accuracy.
Here are some maintenance tips: Make sure to clean the punch and die. They don't need lubrication but cleaning can prolong their life expectancy. Use only Enerpac Oil for both the punch and pump. Always match punch and die correctly. You should set up larger openings so that the dies point down for operations. Make sure to immediately replace cracked, chipped or worn-out dies and punches. To avoid cracks in materials processing, always use the appropriate lifting force.
Gulf States Saw & Machine Co. makes hydraulic punching machines that can punch complex shapes such as squares and rectangulars. Our range is portable and double-acting hydraulic punches are used in many different industries.
This 35-ton portable hydraulic punch press from Cleveland Steel Tool weighs just 31 pounds, is easy to use, and punches in seconds. The dual-action ssures easy linear operation. Unlike other similar tools, these punches will punch and strip inside a 90 degree arc movement of the lever. The upper rotary-style punch generates enough power to punch a 1/2 inch hole through 1/2 inch mild steel plate. The throat of the punch allows for punching…
Our 35-Ton portable hydraulic punching unit weighs just 31 pounds, is easy to use and punches in seconds. The dual-action stripper holds the material being punched and then strips the material from the punch so you're ready for the next hole in seconds. It is ideal for punching bus bars, tower iron, railing, I-beams and truck frames with a maximum tensile strength of 65,000 psi. Mount to your work bench or take it to the job site. Oblong, square, hex and rectangular tools are available in 24 hours.
This portable hydraulic punch pressing from Cleveland Steel Tool measures just 31 pounds. It is easy to use and punches within seconds. Dual-action technology ensures smooth linear operation. These punches punch and strip in a 90° arc movement unlike other similar tools. The upper rotary punch is powerful enough to punch through 1/2 inch plates of mild steel. The throat allows for punching...
Our Porta Punch is the fastest and most efficient way to punch out 13/16" round holes in 3/8” thick mild steel. It has a MAXIMUM Tensile Strength of 65,000 PSI.
Our Porta-Punch is the quickest and easiest way to punch up to 13/16" Round Holes in 3/8" thick mild steel with a MAXIMUM tensile strength of 65,000 psi.
Hydraulic punches are used to create round, square, or oblong holes in metal. They are intended for use with mild steel, nonferrous metals, and some plastics (non-shattering). Hydraulic punches can be powered by hand pumps, air/hydraulic, gas, or electric pumps capable of producing up to 10,000 psi (700 bar).
A punch is a tool used to make an indent or a hole in a hard surface. They are typically made of a hard metal rod with a narrow tip on one end and a broad flat "butt" on the other.
A punch press has two cooperating components: the punch, which is attached to the machine's reciprocating ram, and the die, which is clamped onto a bed or anvil with a flat surface perpendicular to the ram's path. When in use, the punch pushes against the workpiece held in the die.