Tube Lasers Cutting Systems 101

Tube Lasers Cutting Systems Dallas Tx

The applications of tubes and profiles are numerous. The use of processed tubes and profiles is endless, in every industry. The laser-assisted production of tubes and profile offers many possibilities for design and manufacturing.

This is the easiest way to enter tube laser cutting. Tubes upto O 4,72" (120mm)2D CutFiber laser

StarFeed can be used as an automated loader/unloader to the StarCut Tube laser cutting machine. It comes in two sizes, S and L. The StarFeed allows you to fully automate dry and wet cutting for tubes of any diameter from 1-20mm. StarFeed L can store 48 tubes and allows processing of oval tubing. Its sensor-controlled gripping unit avoids damage. The result is a substantial increase in productivity.

How do you compensate for that? Traditionally, you are going to come down and touch the face with a sensor that marks the contact point. The tube is then rotated, and the opposite side of the tube is touched. That gives the control an idea of just how bowed the tube is. This method is accurate and can ensure those through-holes work out for the application. But keep in mind that each time a rotation of the tube occurs, the ability to deliver very high tolerances is reduced.

Tube Lasers Cutting Systems Dallas Tx
Tube Laser

Tube Laser

A few machinery manufacturers now use cameras to verify tubes. The cameras reduce the quality inspection to less than a second, as well as the number of required rotations. This allows the machine both to remain productive and accurate.

For loading tube stock up 80" or 6'8", we offer a tube extension. Please note that the maximum part size for this extension is 52".

Tube Laser Cutting Systems Design

The product images shown are for illustration purposes only and may not be an exact representation of the product. Gulf States Saw & Machinery Co., Inc. reserves the right to change product images and specifications at any time without notice.

Fiber lasers have a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 laser beam. With its much smaller wavelength, the fiber laser produces a beam that is much more easily absorbed by the reflective material; a CO2 laser is much more likely to reflect off the surface of these materials. Because of this, fiber laser cutting machines can cut brass, copper, and other reflective materials. It should be noted that a CO2 laser beam that reflects off the material can not only damage the machine’s cutting lens, but also the entire beam path. Using a fiber-optic cable for the beam path removes this risk.

Tube Laser Cutting Systems Design

Tube Lasers Cutting Systems Washington Dc

A tube's very nature prevents the use of high-powered lasers. Flat sheet laser cutting machines can now be equipped with laser generators that are as powerful as 12kW. Tube laser cutting machines, however, only require 5kW. You must always consider the side you are cutting when you work with a tube. A stronger laser will simply cut through the tube from the opposite end. (Officially, you don't have any need to worry if you are cutting a beam or channel with the tube laser.

Many of Gulf States Saw & Machinery Co., Inc.'s tube-laser-cutting systems incorporate intelligent machine functions, such as intelligent monitoring, setup, cutting, and other functions. These automated functions make it easier to operate and increase machine efficiency. These lasers are versatile and can be used in many industries.

Tube Laser Cutting Systems 500w

Record speeds are achieved by the TruLaser Tube 5000 fiber. This fiber takes full advantage the solid-state laser's strengths. This means that the user can process quickly and have access to a large number of parts.

We are leaders in the production of advanced laser-cutting technologies, as well as CNC controls and automated systems.

Tube Laser Cutting Systems Design

Check our other pages :

Tube Laser Cutting Systems New Zealand

Traditional tube features can be tedious. FabLight makes getting exactly what you want and how it was designed easy. It takes just minutes.

When fabricators think of fiber laser cutting technology they may first think high-speed. This might be true. However, speed is subjective when it comes to tube-cutting. It's not the cutting speed of the tube that matters, but rather the processing time.