Dual Cylinder Press Brake And Slip Roll

A Dual Air Brake System

You get raw power, heavy-duty bend performance, and better technology all in one cost-effective package.

Intuitive operation, high productivity, heavy-duty bend performance, and high productivity all in one cost-effective package

Ranging from entry-level hydraulic all the way up to heavy-duty, fully customized solutions that cover any of your requirements for sheet metal forming, these press brakes represent the apex of pounds-to-performance for industrial bending.

Automated press brakes can ease the pressure on your production line if there are deadlines or timelines that must be met. How can you do this?

Dual Cylinder Hydraulic Handbrake

Our press brake machines have important advantages over other models, thanks to Standard Industrial's reputation of durability and repeatability.

The sheet metal can be bent by air bending when the punch ends and the V edges are connected. However, this type of bending has a spring back result. When the punch is removed, the bending force is lower and the metal sheet springs backwards just like elastic.

Dual Cylinder Hydraulic Handbrake
Pedal Switch

Pedal Switch

The press brake is a must-have for any metal fabrication shop. Despite being the most crucial piece of machinery in a shop and highly valued, many people don't understand them. We've created this guide for you to better understand the press brakes.

A Mitsubishi automatic tool changer (ATC), fitted to a press brake, stands out in many ways.

Press Brake Controllers

Also, we offer a range press brakes that work with the hydraulic control system. Its bending capability is strong enough for handling large work-pieces. Due to its enormous tonnage capacity, the unit can efficiently work on thick metal materials. This range can be used in Single Cylinder or Dual Cylinder format Y1+Y2. It does not require complicated operation. The Press Brakes can handle steel, brass as well metal sheets and aluminum alloys.

A Mitsubishi automatic tools changer (ATC), equipped with a press brake stands out in many ways.

S13 Dual Caliper
S13 Dual Caliper

Standard is currently the manufacturer of the most variety of hydraulic presses brakes. We offer 20 models from our ADR5 axis cnc hydraulic presses brake series. These range from small press braking units that measure 4' in length to large hydraulic press braking units measuring 20' in length. ADS series premium is available with up 14 CNC axis and 32 models. These can be used to bend metal up to 26 feet 5 inches. Our ADS series machines can be customized in 13 different sizes and capacities up to 3300 tons. For those customers that need a basic press brake, we offer the PBF Series. For quiet operation and energy efficiency, the AD Servo brakes are the more sophisticated. They have a hybrid hydraulic design and ball screws. Standard introduces the FBS series, which is the "flexible-bending solutions" type of press brakes. FBS series brakes are high-tonnage press brakes that can be run in tandem or triangular mode. There is also the option to handle material automation and other handling options.

It’s been said that "the little guys sometimes punch well above their weight class." Such is the case with our small 4 foot press brake. This compact bender comes standard with a CNC controlled X axis back gauge, tangs that accept euro or american style tooling, LED rear working light, two sliding front sheet supports with a linear rail, and a dual palm/foot station with a selector switch. You for sure are going to want to check out this new powerful, fast and accurate small press brake that packs a bend "punch" like no other.

Dual Cylinder Press Brake 06

This game-changing tool changer provides real-time information that allows any press brake operator to perform better.

Looking for the ideal combination of serious bending strength and cost-efficient operation without sacrificing quality or output?

Dual Cylinder Press Brake And Slip Roll

Frequently Asked Questions

Axis Description Axis Explanation X2 Right stop finger backward and forth moving the axis R1 left end stop finger up-and-down moving the axis Z1 right end stop finger left-and right moving the axis 5 additional rows.

Crowning is the method by which press brakes correct for deflections in both the upper beam or lower bed when pressure applies. There are different methods, depending on the model and make of the press brake.

You shouldn't use the clutch to turn corners. The transmission mechanism is freed by pressing the clutch, which can affect the vehicle's stability. If your vehicle is in an imbalanced position while you turn, it can lose traction. Depending on the speed, the vehicle may tip over.

The most common reason for a soft/spongy pedal is air in the brake lines. Breathing in air can cause the brake pedal to feel soft or spongy. If your brakes feel spongy or soft, it is time to flush or change the brake fluid.

Re: Use of clutch while braking if it is urgent and you need to stop quickly, then the brakes should not be applied. This will increase engine braking and help the vehicle stop faster. However, it might stall the vehicle.