Cnc Beam Drill Line 3/8

Cnc Beam Drill Line In Word

"..We have drilled approximately 25,000 hole since we purchased our CNC Beam Drill Line just four months ago. It used take us about 5 minutes each to drill and lay out each hole. It now takes us around. 30 seconds per hole... an 1875 man hour savings in four months. That is $84,375 at our shop. As you can see, this machine will be fully paid off in less then one year. It is not only faster than our production, but it also allows us to free up floor space for other jobs.

Programming the CNC Beam Drill Line for new operators is simple and intuitive, even for those who don't have any computer or CNC experience.

Cnc Beam Drill Line In Word

CNC Beam Drill Lines are 100% hydraulic machines that make maintenance and parts very affordable. CNC Drilling Line was made to be used worldwide and only uses parts from major manufacturers. The majority of components can be found locally. Voortman maintains all parts in stock so that they can be delivered next day to the USA. In most countries that we serve, we offer local assistance and support.

Our beam drill line machines feature central lubrication and linear guides. This ensures smooth operation and less maintenance. Each coordinate system has a 4-station tool changer that allows it to drill, mill and scribe as well as counter sink or tap. It can also swap tools mid-operation without any disruption. The positive beam positioning system consists of an arm attached on the feed conveyor to a rack-and-pinion system. This allows the beam to be positioned more precisely as it passes through the drill line.

Processing

Processing

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

The CNC Beam Drill Line can import DXF files and can use them to process 3-D shapes as long as the steel is detailed according to specific rules. Some of these rules might be different to the way you are detailing at the moment and might require some adjustment. This process is not nearly as seamless as the 3-D modeling software solutions above.

Cnc Beam Drill Line Group

The ability to mill quickly speeds up project completion. With the Advantage-2 user-friendly Raptor 3DCAD/CAM program, it is possible to quickly program parts. Directly access the 3D platform to view, modify and export information. Advantage-2 drills are known for their scribing capabilities, the ability of milling slots and large lifting holes, and they also have the ability to trace. This is what really sets this machine apart. You can create layout lines, piece marks, and central points with the scribing. This flexibility has allowed us to use the scribing when we need it and make our own decisions.

AC Unit on Electrical Cabinet. - The unit can be mounted on the cabinet’s High power (480v), side. It is in close proximity to the location that the drives are located. This option maintains the cabinet temperature and speeds up heat dissipation. All axes' servo drives are the major contributors to heat within the electrical cabinets.

Cnc Beam Drill Line Group

Plasma Cutting Machine

The CNC Beam Drill Line is built exclusively for GSS Machinery by Voortman. Voortman handles the installation, warranty and service work on the CNC Beam Drill Line. And while Voortman is the service provider, GSS Machinery is always there to get involved should the need arise.

Powered by 25 HP (18.5 kW) Siemens spindle motors, the Advantage-2 is outfitted with 3 drill spindles, each equipped with 5-station tool changers. This powerful drilling technology allows for maximized operating time and drill hole quality.

Steel Fabricator

We at GSS Machinery are often asked by our customers what drill bits should they use – twist drill bits or insert bits? Our number one agenda is to ensure that our customers pursue the lowest cost per hole drilled, as this will make them more competitive and profitable. However it is important that they fully understand their options, Insert Drill Bit (Spade Drill Bit ) Advantages

Voortman’s Roller Feed Measuring system surpasses industry standards in roller measurement technology. The key to accurate measurements is not allowing for any production hesitations. Even when there are material variations, accuracy must be maintained.

Cnc Beam Drill Line Group

Check our other pages :

Cnc Beam Drill Line 001

The CNC Beam Drill Line can not only lay out and drill your holes in any kind of steel profile in a fraction as long as it takes you to do manually using a mag drill but also marks your welded attachments. This eliminates the need for tape measures.

Voortman's commitment and dedication to support and service is legendary. They are the industry standard. Voortman employs a global team to support customers. They are always available at the Voortman 24-hour customer support center. Voortman offers support via a world-class remote diagnostic tool, available local support, and an industry-leading guarantee.

Frequently Asked Questions

These nodes can connect a beam to a column or a wall. A beam that supports multiple beams is called the main beam. Some of its nodes can be non-supporting. These can be, for example, the nodes on which secondary beams rest.

There are many types of beams. A universal beam is also known as an I beam. It is the most commonly used beam in steel structures. ... Hip beam. Trussed beam. ... Lattice beam. ... Composite beam. ... Chilled beam ... Reinforced concrete beam. ... Steel beam. Additional items

C-Channel is usually stronger than tube in the vertical direction (as shown in the beam profile chart picture above).

You will need at least 4-2x16 or 8x16 wood beams to span 20 feet. A 4 nailed 2x16, 4-2x16, or 8x16 wood beam will allow you to span 20 feet.

Beam can support strain and pressure, while bars can maintain pressure (intended to take pressure). The Rods/Bars refer to any part that is exposed to the hub (Tensile/Compressive but no Transverse/Torsional load) Loads, as it were.