Cnc Beam Drill Line Installation

Cnc Beam Drill Line Key

Importing files directly from steel detailing software is preferable. This eliminates the need for additional steps and eliminates any potential errors in data capture. In this regard, there are two distinct groups:

The programming of the CNC Beam Drill Line can be done even manually. Peddimat is the machine programming software and most operators can program most parts within less than an hour. Of course practice makes perfect. The best way to program the machine, however, is to import parts from a CAD drawing, preferably created in 3-D modeling software like ProSteel 3D or StruMis. These files can be imported directly into the machine. The operator simply selects the part and presses the Cycle Start button.

Cnc Beam Drill Line Key

The CNC Beam Drill Line can be operated easily and Avenger operators are the ones who lay out the floor. You don't need any prior computer knowledge and are given full training at the time of installation.

CNC Beam Drill Line not only processes beams and columns but can also easily process all steel profile including channel, flat, flat, base plates RHS, square and round.

Cnc Beam Drill Line Tensile Strength

Cnc Beam Drill Line Tensile Strength

Continuous production? Check. The fabricator's edge does not come from the ability to just handle processes, but in the time it takes to complete them and simultaneously exceed industry standards for quality. Triple axis drilling and milling leads to processing a complete profile in record time. Powered by high-speed 25 horsepower Siemens spindle motors, this strength captures industry-leading hole penetration times and each drilling axis utilizes ball screw feed positioning. With all that power under the hood this drill line wields an advanced clamping system designed specifically to bring vibrations to the bare minimum. Extreme accuracy? Check.

The CNC Beam Drill Line is an extremely space-efficient beam processing solution as it only requires a floor space of 70ft x 9ft, making it ideal for even the smallest fabricator or fabricators with space limitations. We also have many CNC Beam Drill Line installations that are outside, freeing up even more space for the fabricator.

N Size Drill

All of our beam drill lines machines are equipped with central lubrication, linear guides, and a tool cooling to ensure smooth operation. There is a four-station tool changer within each coordinate system. This allows the machine to drill and mill, scribe, countersink, or tap as required. Tools can be easily swapped mid-operation. A positive beam positioning arm is attached to the feed conveyor. It allows for more precise positioning of the beam as it moves through the drillline. The rack and pinion system maintains.004" making our steel beam drilllines more accurate than friction roll machines.

Z-Reader Probe- The Z-Reader probe is used to map the surface. You can control it manually or programmatically. It is not active during cutting and can be retracted to keep it out of harm's path. You can trigger it to check the surface at each pierce before cutting begins. Or, you could use it to drive the surface mapping of the entire part. It starts with the initialization of the device to the surface at program start. The difference is then accumulated or tracked.

N Size Drill

Akyapak

CNC Beam Drill Lines are space-efficient beam processing solutions. They require a minimum of 70ft by 9ft floor space. This makes it perfect for smaller fabricators and fabricators who have limited space. Many CNC Beam Drill Line installations are located outside, which allows for more fabricator space.

The Franklin HD145(3) spindle CNC drill is available in 44-inch width. The HD-145 can carry beams upto 750 lbs/foot. Hi-performance spindles provide drilling capabilities of up to 2,000 rpm. This rigid design delivers extremely high feed rates of up 300 surface feet per hour. You can have the Franklin HD145 equipped with various material handling packages, from 300 lbs per ft to 750lbs per ft.

Factory-trained Technician

Z-Reader Probe- This probe maps the surface's location. It can be operated manually and programmatically. The option is removed from danger and is not active while the cutting process is underway. It can be used for surface mapping or to verify surface at each point before the cutting process begins. It is responsible for initialization, or zeroing the device on the surface at beginning of a program. From there it tracks the difference or accumulates them.

Advantage-2 carbide drills use electronic ball screw drive spindle motion and automatic tool change technology. The combination of Voortman's legendary build quality and mechanical design gives the best combination of strength, agility, and strength.

N Size Drill

Check our other pages :

Cnc Beam Drill Line Equipment

Programming of the CNC Beam Drill Line is very simple even when done manually. The machine programming software is Peddimat and most operators can learn how to program most parts in less than an hour. Of course practice makes perfect. However the best way to program the machine is to import parts directly from a CAD drawing preferably done in some 3-D modeling software such as Tekla Structures, SDS/2, ProSteel 3D, StruMis etc. These files import directly into the machine and the operator merely selects the part to be processed and hits the Cycle Start button.

Yes. There are many CNC Beam Drill Lines outside. Weather protection must be provided for the control panel as well as the mobile platform. For photos of many of our outdoor installations, please contact us.

Frequently Asked Questions

Divide the beam's span in inches by 20 to calculate its required depth. A 25' span would equal 25x12 / 20, which is 15 inches. This beam's width would vary between 1/3 to 1/2 its depth.

For small buildings, the distance between two reinforced columns is between 3-4m and 6-9m. Larger facilities that require large columns and lots of free space will have to be at least 6-9m. A distance of 5m is acceptable for ordinary structures. The maximum span is 7.5, while the minimum span is 2.5m.

THE STANDARD SIZE FOR THE BEAMS It is 9" x 12" or 225mm x 300mm in a residential building, according to (IS codes).

The hole size should not exceed 38mm (1.25 in.). The beam depth should not exceed one-tenth of the hole diameter, whichever is less, with the exception being 25mm (1 in.).

Horizontal Beams are the most commonly used structural members. They are usually horizontal, but they can be oriented in any direction. Beams are large horizontal members which carry floor loads from floors, walls or roofs to columns or foundation walls.