Cnc Drill Line Llc

Cnc Drill Line Development

The Advantage-2 is powered via 25 HP (18.5kW), Siemens spindlemotors. It features 3 drill spindles that are equipped with 5-station tool changing stations. This powerful drilling technology ensures optimal operating time as well as drill hole quality.

With its strong material handling support and precise measurement capabilities, the Advantage-2 CNC beam drill is perfect for tandem installations with any Voortman automated sawing system.

Cnc Drill Line Development

Renishaw Calibration 5 Axis - The calibrator is a Renishaw model APCA45 equipped with a modified spherical stilus. The device includes a retractable lid and an air purge to remove debris and dust during activation. It mounts to the swing arm, which is controlled by the pneumatic rotary.

The CNC Drill Line is built exclusively for GSS Machinery by Voortman. Voortman handles the installation, warranty and service work on the CNC Drill Line. And while Voortman is the service provider, GSS Machinery is always there to get involved should the need arise.

Cnc Drill Line 6 Helix

Cnc Drill Line 6 Helix

GSS Machinery receives a lot of questions from customers asking us which drill bits we should use. Are they insert bits or twist bits? We are committed to ensuring that our customers have the lowest cost per hole, which will make them more profitable and competitive. But, it is essential that they fully comprehend their options. Insert Drill Bit/Spade Drill Bit Advantages

Cnc Drill Line And Tap Machine

The CNC Beam Drill Line was a huge hit with small- to medium-sized fabricators who produce both structural steel and other miscellaneous materials. More than 600 CNC Drill Lines have been installed since 2003. This amazing machine has made a significant impact on the lives of many steel fabricators.

".. This machine is intended for structural fabricators. However, I was able to see that it would be a good fit for drilling truck frames. Assembly was easy because of the repeatability and accuracy. Avenger drills the channels for one truck in two hours. If we were to do this manually it would take 16 hours. The Avenger has greatly increased our productivity and profitability !.."

Cnc Drill Line And Tap Machine

Cnc Drill Line Extension

This Morse Taper chuck adaptor permits you to use standard parallel shank drilling bits for smaller diameters. It has a maximum drilling diameter of 12mm. (12mm) and a minimum drill diameter of 3/64 (1mm).

Voortman developed Raptor 3DCAD/CAM Software, which takes CNC innovation to the next level by allowing users to program more quickly and accurately. The 3D platform allows you to inspect, modify, and export part information. This, combined with Voortman CNC technology, means maximum fabricator capacity.

Time

The CNC Drill Line is built exclusively for GSS Machinery by Voortman. Voortman handles the installation, warranty and service work on the CNC Drill Line. And while Voortman is the service provider, GSS Machinery is always there to get involved should the need arise.

Voortman's inside service technicians don't often need to be present at your machine in order to fix a problem. Voortman technicians can operate your control using an internet connection. Voortman equipment uses the Powerful Windows(r), Siemens control that allows for this capability. It also provides superior diagnostics via Windows(r).

Cnc Drill Line And Tap Machine

Check our other pages :

Clipper

The CNC Drill Line is the most affordable CNC beam drill line on the market today and ensures that the fabricators is the low-cost producer, allowing him to win more work and to make more margin.

Advantage-2 carbide drill line uses automatic tool changing technology, completely electronic ball screw-feed spindle motion, and fully electronic ball screws feed spindle. These combined with Voortman’s outstanding build quality and design make the Advantage-2 carbide drill line an ideal combination of strength and agility.

Frequently Asked Questions

The hole size should not exceed 38mm (1.25 in.). The beam depth should not exceed one-tenth of the hole diameter, whichever is less, with the exception being 25mm (1 in.).

A36 is a popular low-carbon, low-cost steel that is widely used. It is known for its high yield strength (36,000psi) as well as its excellent machinability. A36 can be extended to approximately 20% of its original length and is often used for columns, beams and decking.

The failure of beams can be caused by either flexure, shear, or torsion when the failure modes exceed the design loads. The type of load that the beam can sustain and the time it reaches the factored load will determine if there is a chance of structural failure.

The two angled segments get compressed and the horizontal segment is loaded with tension. The resulting tensile strength decreases as the angles get more extreme. A thicker beam will resist the bending force of weight more effectively than a thin beam.

Channels, or C-beams, are used when the flat back side of the web is mounted to another flat surface. This allows for maximum contact. Sometimes they are welded back-to-back to create a non-standard I beam.